Features: |
|
| - | Flow rate range 0.5 to 6 m/s (1.6 to 20 ft/s) |
| - | For up to 103 bar (1500 psi) pressure |
| - | For up to 149℃ (300℉) temperatures |
| - | DN15 to DN300 (0.5 to 12 in.) pipe range |
| - | Simple Installation |
| - | 316SS body |
| - | Tungsten Corbide shaft |
| - | 7.6m (25 ft.) cable included |
| - | FM & CSA, CE approved |
|
|
|
Specifications: |
|
| - | Flow Rate Range: | 0.5 to 6 m/s (1.6 to 20 ft/s) |
| - | Pipe size range: | DN15 to DN300 (1/2 to 12 in.) |
| - | Linearity: | ±1% of max. range @ 25 °C (77 °F) |
| - | Repeatability: | ±0.5% of max. range @ 25 °C (77 °F) |
| - | Min. Reynolds Number Required: | 4500 |
| - | Max. Temperature/Pressure Rating: | Socket Weld or Weld-On Mini-Tap fittings: |
| | | 103 bar (1500 psi @ safety factor 1.5) @ 149 °C (300 °F) |
| | | Strap-on Saddle fitting:21 bar (300 psi) @ 66 °C (150 °F) |
| | | Operating Temperature:-18 °C to 149 °C (0 °F to 300 °F) |
| - | Cable Length: | 7.6 m (25 ft), can be extended up to 60 m (200 ft) |
| - | Cable Type: | Cable (per foot) 2 cond. w/shield, 22 AWG |
| - | Body Materials: | 316 SS (ACI type CF-8M per ASTM A351), DIN 17440 |
| - | Rotor Material: | CB7Cu-1 Alloy |
| - | Rotor Pin Material: | Tungsten Carbide GRP 1 or 316 stainless steel |
| - | Retainers Material: | 316 stainless steel (1.4401) |
| - | Rotor Bearings Material: | Rulon ® B (Fluoroloy/ PTFE) |
| - | Gasket Material: | KLINGER ® sil C-4401 (supplied with fitting) |
| - | Frequency: | 12 Hz per ft/s nominal |
| - | Amplitude: | 5 to 8 mV p-p per Hz |
| - | Source Impedance: | 11.6 KΩ |